Subject: Re: ipcop and serial ports
From: Mike Tibor (tibor@lib.uaa.alaska.edu)
Date: Sun Apr 27 2003 - 20:14:44 AKDT
On 27 Apr 2003, Jim Gribbin wrote:
>
> I am running the ipcop 1.3 (2.4.20 kernel) firewall on an old micron
> 166MHz mobo. I am using a pci hi-speed serial card to talk to my isdn
> modem. It insists on setting up the serial card as ttyS4 & ttyS5 even
> though the on-board serial ports are turned off and do not show in
> /proc/ioports.
Can you reassign (maybe via the card's bios, or possibly via jumpers) the
IRQ and IO addresses so that they correspond to ttyS0 and ttyS1 (I think
0x3f8/irq4 and 0x2f8/irq3, but don't quote me on that).
Mike
-- Mike Tibor Univ. of Alaska Anchorage (907) 786-1001 voice Network Technician Consortium Library (907) 786-6050 fax tibor@lib.uaa.alaska.edu http://www.lib.uaa.alaska.edu/~tibor/ http://www.lib.uaa.alaska.edu/~tibor/pgpkey for PGP public key--------- To unsubscribe, send email to <aklug-request@aklug.org> with 'unsubscribe' in the message body.
This archive was generated by hypermail 2a23 : Sun Apr 27 2003 - 20:14:46 AKDT