Subject: Re: Ordering the IDE devices...
From: shortpier (shortpier@shortpier.is-a-geek.com)
Date: Thu Aug 07 2003 - 20:56:47 AKDT
In bios look for boot from off board IDE first or some thing should have
3 settings, auto, no, yes or something like this. If you want it to use
onboard IDE as hda Place it in the no position
Shortpier
On Thu, 2003-08-07 at 16:30, Joshua J.Kugler wrote:
> We just purchased, for our server, a very nice Promise Ultra133 TX2 dual IDE
> controller. Works fine: boots up, detects drives, Mandrake install
> recognizes it, and everything.
>
> The problem comes when it's time to partition. My two big drives (each
> masters on their channel on the TX2) show up as hda and hdc. The master
> drive hanging off the primary channel on the motherboard shows up as hde.
> Not what I was intending.
>
> 1. Is there anything wrong with this? Can I put /boot on hde and still have
> lilo write to the MBR on hda and boot from there?
>
> 2. Is there any way to modify this? The Promise controller doesn't come up
> with any options when it boots, or any way to modify its configuration.
>
> I just wasn't planning on making one of my RAID 1 /home drives hda and boot
> from there. If one of the /home mirrors fails, I still want to be able to
> boot the system (preferably without a floppy).
>
> Any ideas?
>
> Thanks!
>
> j----- k-----
---- Attached file included as plaintext by Listar -- -- File: signature.asc -- Desc: This is a digitally signed message part
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQA/My2ONyWzwlj5xp4RAjsGAJ9YrhQMQ/p1ldTfodWZghceYgVxZQCgjR0g H4MHdLe0yCt1vlQiOZaDsbQ= =Iu4n -----END PGP SIGNATURE-----
--------- To unsubscribe, send email to <aklug-request@aklug.org> with 'unsubscribe' in the message body.
This archive was generated by hypermail 2a23 : Thu Aug 07 2003 - 21:18:32 AKDT