Subject: Re: dial-up in Mandrake9.1
From: shortpier (shortpier@shortpier.is-a-geek.com)
Date: Fri Apr 11 2003 - 03:51:53 AKDT
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable
Check your dmesg to see if the modem is detected in boot... It could be
a winmodem...=20
Shortpier
On Fri, 2003-04-11 at 21:15, Jim Gribbin wrote:
You might want to try using 'minicom' first and make sure you're modem
is where you think it is and that you're at the proper baud rate.
minicom should be included with your distro, but you may have to use it
as root the first you run it to get it set up. You may also need to set
permissions on /dev/ttySx (and /dev/modem) to allow users to access it.
=20
dmesg | grep tty # will show you what serial ports are on your box
setserial -G /dev/ttySx # will show you how the serial port is set up
=20
Jim Gribbin
=20
On Fri, 2003-04-11 at 12:53, Tim Jordan, Network Services wrote:
> Any ideas on how to do this as painless as possible.
> I would like to setup a dialup account on Dell Inspiron 3500.
> I've tried using drakconnect w/no luck. KPPP does not get a respons=
e=20
> from the modem
>=20
> Tim
>=20
>=20
>=20
> ---------
> To unsubscribe, send email to <aklug-request@aklug.org>
> with 'unsubscribe' in the message body.
>=20
=20
=20
---------
To unsubscribe, send email to <aklug-request@aklug.org>
with 'unsubscribe' in the message body.
--=20
10 mins, Bill Gates, and a baseball bat. Is this to much to ask God?
-- Attached file included as plaintext by Listar --
-- File: signature.asc
-- Desc: This is a digitally signed message part
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (GNU/Linux)
iD8DBQA+lqxZNyWzwlj5xp4RAmOPAJ0QcrA7gn8sZXeQKlju3Ttr+NgsYgCgu37O
YI6OlpYN7hkImlTeP35IDFA=
=kMUy
-----END PGP SIGNATURE-----
---------
To unsubscribe, send email to <aklug-request@aklug.org>
with 'unsubscribe' in the message body.
This archive was generated by hypermail 2a23 : Fri Apr 11 2003 - 13:34:13 AKDT