Subject: Re: Need help with digital camera
From: Justin Dieters (enderak@yahoo.com)
Date: Fri Jan 18 2002 - 23:34:40 AKST
According to www.qbik.ch, (linked to by linux-usb.org), someone says:
"This camera works, if it is configured to emulate a disk-drive (see
manual of the camera). In that case, the product-id changes to 0x4002.
Then the camera will be detected by usb-storage (Linux 2.4.14). Finally
you can mount the CF-card via /dev/sda1."
I'd look on Google for more info if you need it.
Justin
www.enderakonline.com
Mike Mellor wrote:
> Hello -
> I am trying to get the HP 318C digital camera that I
> bought fro my wife for Christmas to interface with my
> computer. I am using a pretty much default RH7.2
> installation (kernel 2.4.7-10). I ran jUSB which
> shows that the computer is aware of the USB ports and
> that something is attached, but I can't seem to
> connect to the camera. I also have a generic USB
> webcam hooked up that can't be found by xsane. What
> do I need to do to get the camera working (I plan to
> use gphoto2 or jphoto as an interface)? The following is a "cat /proc/bus/usb/devices". Thanks.
>
> Mike
>
> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1
> Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8
> #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 0.00
> S: Product=USB UHCI Root Hub
> S: SerialNumber=fcc0
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
> Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2
> Spd=12 MxCh= 0
> D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8
> #Cfgs= 1
> P: Vendor=0553 ProdID=0002 Rev= 1.00
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=400mA
> I: If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff
> Driver=cpia
> E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl= 1ms
> I: If#= 1 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff
> Driver=cpia
> E: Ad=81(I) Atr=01(Isoc) MxPS= 448 Ivl= 1ms
> I: If#= 1 Alt= 2 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff
> Driver=cpia
> E: Ad=81(I) Atr=01(Isoc) MxPS= 704 Ivl= 1ms
> I: If#= 1 Alt= 3 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff
> Driver=cpia
> E: Ad=81(I) Atr=01(Isoc) MxPS= 960 Ivl= 1ms
>
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
This archive was generated by hypermail 2a23 : Fri Jan 18 2002 - 23:39:13 AKST