Subject: Re: Need help with digital camera
From: Mike Mellor (mmellor1@engineer.com)
Date: Sun Jan 20 2002 - 04:30:01 AKST
Justin -
Thanks - I just kind of skimmed through the manual (didn't think it would have anything pertaining to Linux).!
Changing the camera's setup to act as a USB storage device, and upgrading/setting USB storage support into the kernel did the trick.
Thanks.
Mike
-----Original Message-----
From: Justin Dieters <enderak@yahoo.com>
Date: Fri, 18 Jan 2002 23:34:40 -0900
To: Mike Mellor <mmellor1@engineer.com>
Subject: Re: Need help with digital camera
> According to www.qbik.ch, (linked to by linux-usb.org), someone says:
>
> "This camera works, if it is configured to emulate a disk-drive (see
> manual of the camera). In that case, the product-id changes to 0x4002.
> Then the camera will be detected by usb-storage (Linux 2.4.14). Finally
> you can mount the CF-card via /dev/sda1."
>
> I'd look on Google for more info if you need it.
>
> Justin
> www.enderakonline.com
>
>
>
> Mike Mellor wrote:
>
> > Hello -
> > I am trying to get the HP 318C digital camera that I
> > bought fro my wife for Christmas to interface with my
> > computer. I am using a pretty much default RH7.2
> > installation (kernel 2.4.7-10). I ran jUSB which
> > shows that the computer is aware of the USB ports and
> > that something is attached, but I can't seem to
> > connect to the camera. I also have a generic USB
> > webcam hooked up that can't be found by xsane. What
> > do I need to do to get the camera working (I plan to
> > use gphoto2 or jphoto as an interface)? The following is a "cat /proc/bus/usb/devices". Thanks.
> >
> > Mike
> >
> > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1
> > Spd=12 MxCh= 2
> > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8
> > #Cfgs= 1
> > P: Vendor=0000 ProdID=0000 Rev= 0.00
> > S: Product=USB UHCI Root Hub
> > S: SerialNumber=fcc0
> > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
> > Driver=hub
> > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
> > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2
> > Spd=12 MxCh= 0
> > D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8
> > #Cfgs= 1
> > P: Vendor=0553 ProdID=0002 Rev= 1.00
> > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=400mA
> > I: If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff
> > Driver=cpia
> > E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl= 1ms
> > I: If#= 1 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff
> > Driver=cpia
> > E: Ad=81(I) Atr=01(Isoc) MxPS= 448 Ivl= 1ms
> > I: If#= 1 Alt= 2 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff
> > Driver=cpia
> > E: Ad=81(I) Atr=01(Isoc) MxPS= 704 Ivl= 1ms
> > I: If#= 1 Alt= 3 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff
> > Driver=cpia
> > E: Ad=81(I) Atr=01(Isoc) MxPS= 960 Ivl= 1ms
> >
>
>
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
>
--_______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup
1 cent a minute calls anywhere in the U.S.!
http://www.getpennytalk.com/cgi-bin/adforward.cgi?p_key=RG9853KJ&url=http://www.getpennytalk.com
This archive was generated by hypermail 2a23 : Sun Jan 20 2002 - 04:30:07 AKST