[aklug] Re: OpenWRT

Quoting "Joshua J. Kugler" <joshua@eeinternet.com>:

> On Wednesday 21 May 2008, Joshua J. Kugler said something like:
>> On Wednesday 21 May 2008, barsalou said something like:
>> > Joshua,
>> >
>> > I would like to know the model....hopefully it is still made.
>>
>> WL-500g Premium
>> http://www.asus.com/products.aspx?l1=3D3D3D12&l2=3D3D3D43&l3=3D3D3D0&mode=
l=3D3D3D=3D
> 1121
>> &model=3D3D menu=3D3D3D1
>>
>> http://www.newegg.com/Product/Product.aspx?Item=3D3D3DN82E16833320030
>>
>> Lots of memory, and fully supported by OpenWRT.
>>
>> Has a serial console, but requires soldering to use it. Had to do
>> that=3D3D20 once when I put the wrong value in a config file. That
>> netgate might=3D3D20 be a better option as the serial console is built
>> in. But if you don't=3D3D20 mind soldering, I think the parts for the
>> serial console (bracket,=3D3D20 plug, USB to serial cable) were only
>> about $30.
>
>
> SIGH!!! Why sis the AKLUG list the only one I subscribe to that message=3D=
20
> up my newlines and characters like "equals." In those URLs above,=3D20
> replace all the EQUAL3D with the equals character, and they should be=3D20
> OK. I'm using KMail with plain text messages. Anyone know why my=3D20
> e-mails are getting butchered?
>
> j

This was actually brought up before and it should be in the archives. =20
Jim G found the solution I think.

---------
To unsubscribe, send email to <aklug-request@aklug.org>
with 'unsubscribe' in the message body.
Received on Wed May 21 14:05:15 2008