Subject: RE: webmail issues
From: W.D.McKinney (dee@akwireless.net)
Date: Sat Dec 28 2002 - 02:42:47 AKST
Without some logs it's hard to debug this kind of issue. I suspect that
since they deployed the MPLS
network for the SOA contract, they have some burps in NWC gigE and 100mE
loops, which drops connectivity
on T1's connecting to the ACS Internet service. This from my experience
being on T1 IP service.
My guess is that the mymail.acsalaska.net which is
mtr -c 10 --report mymail.acsalaska.net
HOST LOSS RCVD SENT BEST AVG
WORST
192.189.218.254 0% 10 10 1.22 2.42
3.69
s3-7-0-cr4.nwc.acsalaska.net 0% 10 10 3.25 5.47
9.52
ge1-0-0-72-cr5.nwc.acsalaska.net 0% 10 10 4.35 28.58
91.55
mymail.acsalaska.net 0% 10 10 4.95 6.51
7.74
in NWC, it may the connectivity issue. Just one thought.
Dee
-----Original Message-----
From: aklug-bounce@aklug.org [mailto:aklug-bounce@aklug.org]On Behalf Of
Michael Jacobson
Sent: Friday, December 27, 2002 5:35 PM
To: Jim Gribbin
Cc: aklug@aklug.org
Subject: Re: webmail issues
Other than someone at GCI reseting my personal information, I can post
to the list fine from GCI's webmail service.
Anybody have any hints as to why I can't post to the list from ACS'
webmail service.
Dee's sales pitch notwithstanding :-)
Jim Gribbin
----- Original Message -----
From: Jim Gribbin <jewelrysupplier@gci.net>
Date: Friday, December 27, 2002 3:06 pm
Subject: webmail issues
>
> I have been using my ISP's webmail setup lately while doing some
> upgrades to my workstation at home.
>
> For some strange reason, the last couple of posts I have done to the
> list using this service haven't been getting through to the list. I
> get
> error messages telling me that my ISP's mailserver timed out while
> trying to connect to aklug's listserver.
>
> Is it possible that to the list's server these emails appear to be
> froma source other than me causing aklug to refuse it? If so, is
> there any
> way to correct this?
>
> Jim Gribbin
>
>
>
> ---------
> To unsubscribe, send email to <aklug-request@aklug.org>
> with 'unsubscribe' in the message body.
>
---------
To unsubscribe, send email to <aklug-request@aklug.org>
with 'unsubscribe' in the message body.
---------
To unsubscribe, send email to <aklug-request@aklug.org>
with 'unsubscribe' in the message body.
This archive was generated by hypermail 2a23 : Fri Dec 27 2002 - 17:42:54 AKST