Subject: RE: aklug Digest V1 #148
From: Mark-Nathaniel Weisman (mark@outlander.us)
Date: Thu Sep 26 2002 - 10:31:04 AKDT
Barry,
Typically the Compaq brand uses the F10 key to enter into the BIOS.
However, if the drive has been changed out, this function will have to
re-added. By downloading the proper "soft-paq", you can format about 4MB
of the Primary drive to add the utility. Once installed, you will see
the "F10 to enter setup" logo on the bottom right of the boot screen. My
DeskPro 2000 had the same problem, however, now it works great.
His humble servant,
Mark-Nathaniel Weisman
President
Outland Domain Group Consulting
Anchorage,AK USA
http://www.outlander.us
-----Original Message-----
From: Williams Barry C 59TH SIG BN S3 NETWORK(n)
[mailto:barry.c.williams@us.army.mil]=20
Sent: Thursday, September 26, 2002 7:50 AM
To: aklug@aklug.org
Subject: RE: aklug Digest V1 #148
Does anyone know how to get into the CMOS of a Compaq Deskpro 4000?
-----Original Message-----
From: aklug@aklug.org [mailto:aklug@aklug.org]
Sent: Thursday, September 26, 2002 7:40 AM
To: aklug digest users
Subject: aklug Digest V1 #148
aklug Digest Wed, 25 Sep 2002 Volume: 01 Issue: 148
---------
To unsubscribe, send email to <aklug-request@aklug.org>
with 'unsubscribe' in the message body.
---------
To unsubscribe, send email to <aklug-request@aklug.org>
with 'unsubscribe' in the message body.
This archive was generated by hypermail 2a23 : Thu Sep 26 2002 - 10:17:54 AKDT