Subject: Re: AP-10 SCSI on RH 7.2
From: Neil Moomey (neilmoomey@gci.net)
Date: Tue Jun 25 2002 - 08:42:24 AKDT
Thanks Greg, My CD-R is IDE. The SCSI is for my slide scanner so maybe
I need an ID 1 for the SCSI adapter. I was going to put in the RH disk
and do an upgrade but it said I have third party software installed and
it might cause conflicts. I think Ximian is causing that. I might get
rid of Ximian so I can more easily upgrade my RH. Ximian servers are
overloaded from Red Carpet updates anyways.
Neil
----- Original Message -----
From: Greg Madden <pabi@gci.net>
Date: Monday, June 24, 2002 11:19 pm
Subject: Re: AP-10 SCSI on RH 7.2
> On Mon, 2002-06-24 at 22:18, Neil Moomey wrote:
> >
> > I'm trying to get my new SCSI card working on RH 7.2 (AP-10 SCSI
> Pro,> Fast SCSI-2 Bus Master w/BIOS, Int-Std50/Ext-HD50). Here is
> my output.
> > Any ideas? Thanks. - Neil
> >
> > $ cat /proc/scsi/scsi
> > Attached devices:
> > Host: scsi0 Channel: 00 Id: 00 Lun: 00
> > Vendor: Model: CD-R/RW RW7063A Rev: 1.50
> > Type: CD-ROM ANSI SCSI revision: 02
> >
>
> Change the ID of the cdrom to something other than 0 ID 0 is
> usually a
> boot device such as a hard drive. I believe your scsi card is
> working or
> you wouldn't see the device info. BTW what module does that card
> use ?
>
> --
> Greg Madden
> Precision Air Balance, Inc.
> email:pabi@gci.net
> Phone:(907)276-0461 Fax:(907)258-0461
>
>
---------
To unsubscribe, send email to <aklug-request@aklug.org>
with 'unsubscribe' in the message body.
This archive was generated by hypermail 2a23 : Tue Jun 25 2002 - 08:42:36 AKDT