Subject: Re: AP-10 SCSI on RH 7.2
From: Greg Madden (pabi@gci.net)
Date: Mon Jun 24 2002 - 23:19:53 AKDT
On Mon, 2002-06-24 at 22:18, Neil Moomey wrote:
>
> I'm trying to get my new SCSI card working on RH 7.2 (AP-10 SCSI Pro,
> Fast SCSI-2 Bus Master w/BIOS, Int-Std50/Ext-HD50). Here is my output.
> Any ideas? Thanks. - Neil
>
> $ cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: Model: CD-R/RW RW7063A Rev: 1.50
> Type: CD-ROM ANSI SCSI revision: 02
>
Change the ID of the cdrom to something other than 0 ID 0 is usually a
boot device such as a hard drive. I believe your scsi card is working or
you wouldn't see the device info. BTW what module does that card use ?
-- Greg Madden Precision Air Balance, Inc. email:pabi@gci.net Phone:(907)276-0461 Fax:(907)258-0461--------- To unsubscribe, send email to <aklug-request@aklug.org> with 'unsubscribe' in the message body.
This archive was generated by hypermail 2a23 : Mon Jun 24 2002 - 23:20:09 AKDT