Re: Intel Slot One fan

On Sunday 18 September 2005 04:43 pm, Greg Madden wrote:
> I have an Intel PIII 600, slot I cpu, retail package. The fan has a
> high pitched whine, need to replace the fan. The fan housing comes
> off from the heat sink, could swap it for a good one, the heat sink
> won't support screwing a small fan onto it. Any ideas, spare parts ?

Thanks for the suggestions. The retail slot I cpu from Intel, SECC
package, has an attached heatsink and the fan is part of the plastic
housing that is a 'shroud; over the heatsink. AFAIKT, if the fan goes
you can replace the fan/shroud, but I doubt such a thing exists at this
late date. You can remove the factory heatsink,there are third party
parts available, you just need to use a drill to do it, something I am
a little hestitant to do until the fan actually dies.

-- 
Greg Madden
Precision Air Balance, Inc.
Phone: (907)276-0461
email: pabi@acsalaska.net
---------
To unsubscribe, send email to <aklug-request@aklug.org>
with 'unsubscribe' in the message body.