Re: Intel Slot One fan

Sometimes if you angle the fan just right, you can wedge the screws in
there - you might need slightly larger than normal screws. Also try
attaching it from the side - a fan on the side works just as well as one
on the top. I've also used zip ties in a pinch, but this was on a video
card though, so I can't guarantee they wouldn't melt on a CPU heatsink..

Justin

Jim Gribbin wrote:

>Ideas:
>1) super glue
>2) duct tape
>
>Greg Madden wrote:
>
>
>>I have an Intel PIII 600, slot I cpu, retail package. The fan has a high
>>pitched whine, need to replace the fan. The fan housing comes off from
>>the heat sink, could swap it for a good one, the heat sink won't
>>support screwing a small fan onto it. Any ideas, spare parts ?
>>
>>
>
>
>-- Binary/unsupported file stripped by Ecartis --
>-- Type: text/x-vcard
>-- File: Jim.vcf
>
>
>---------
>To unsubscribe, send email to <aklug-request@aklug.org>
>with 'unsubscribe' in the message body.
>
>
>
>

---------
To unsubscribe, send email to <aklug-request@aklug.org>
with 'unsubscribe' in the message body.
Received on Sun Sep 18 20:47:29 2005