Re: video recording server

From the ZoneMinder Forum;
PostPosted: Sat Feb 19, 2005 9:09 pm =20
Post subject: Panasonic KX-HCM10 =09

I've got one of these cameras and can confirm it works fine with ZM,
plus v1.20.2 will support the all PTZ function.

Phil
********
Thanks Ben, I'll give it a try....Tim

On 5/5/05, ben.everitt <ben.everitt@acsalaska.net> wrote:
> This was slashdot'd a month or two ago. It had a really nice 3 page
> writeup on the using the software with d-link cameras that was worth the
> read. What was real nice was the 16 camera capacity and the ability to
> do local and off-site camera monitoring (IP based camera required) with
> motion and continuous capture. They offer a liveCD to try before you
> bother to install the product which I thought was a great feature.
>=20
> http://linux.slashdot.org/article.pl?sid=3D04/10/14/2315207&tid=3D172&tid=
=3D185&tid=3D106
>=20
> http://www.zoneminder.com/
>=20
> -Ben
>=20
>=20
> Alaska Computer Support Services wrote:
>=20
> >I have three net cams (Panasonic KX-HCM..) on my network. I'm in the
> >processes of building a server that will handle the recording of these
> >net cams. I found a solution under the Windows platform that will
> >allow me to use motion detection sensors to start recording on any of
> >the three cams. http://www.securityideas.com/wewapro.html
> >
> >I'm curious if anyone on the list may have a open source solution that
> >they can share with me?
> >
> >Requirments:
> >------------------
> >Recording only upon motion detection (I only have 160GB drive, my
> >first test recording 30 minutes on two cams took up 200MB of disk
> >space. I can't see recording all three cams during "off hours").
> >
> >Record with multiple cameras.
> >
> >Recording audio may be necessary...
> >
> >Sensible method to handle the catalog of video.
> >
> >
> >Any suggestions...
> >
> >
> >Thanks,
> >TJ
> >---------
> >To unsubscribe, send email to <aklug-request@aklug.org>
> >with 'unsubscribe' in the message body.
> >
> >
> >
>=20
> ---------
> To unsubscribe, send email to <aklug-request@aklug.org>
> with 'unsubscribe' in the message body.
>=20
>
---------
To unsubscribe, send email to <aklug-request@aklug.org>
with 'unsubscribe' in the message body.
Received on Thu, 5 May 2005 09:58:22 -0800