Hope everyone is having a wonderful holiday this Christmas.
I have a little MP3 player that I would like to use with Linux.
# cat /proc/bus/usb/devices
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=2735 ProdID=0091 Rev= 1.00
S: Manufacturer=TDK UniFi
S: Product=TDK UniFi Audio Player
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 20mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
/var/log/messages has
Dec 25 14:39:15 papa kernel: usb 1-2: new full speed USB device using
address 5
Dec 25 14:39:16 papa kernel: usb 1-2: Product: TDK UniFi Audio Player
Dec 25 14:39:16 papa kernel: usb 1-2: Manufacturer: TDK UniFi
This in on my all SCSI workstation. So I am wondering how to mout this
unit ? /dev/sda1 is already in use of course.
I have:
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 29160N Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
(scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 63, 16bit)
(scsi0:A:8): 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
Vendor: SEAGATE Model: ST336607LW Rev: 0007
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled. Depth 32
SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: PLEXTOR Model: CD-ROM PX-40TW Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 3940 SCSI adapter>
aic7870: Wide Channel A, SCSI Id=7, 16/253 SCBs
(scsi1:A:0): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: COMPAQ Model: BB01811C9C Rev: 3B05
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:0:0: Tagged Queuing enabled. Depth 32
SCSI device sdb: 35565080 512-byte hdwr sectors (18209 MB)
SCSI device sdb: drive cache: write through
sdb: sdb1
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
(scsi1:A:1): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: DEC Model: RZ2EA-LA (C) DEC Rev: N1H1
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:1:0: Tagged Queuing enabled. Depth 32
SCSI device sdc: 35565080 512-byte hdwr sectors (18209 MB)
SCSI device sdc: drive cache: write through
sdc: sdc1
Attached scsi disk sdc at scsi1, channel 0, id 1, lun 0
(scsi1:A:2): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: COMPAQ Model: BB01811C9C Rev: 3B05
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:2:0: Tagged Queuing enabled. Depth 32
SCSI device sdd: 35565080 512-byte hdwr sectors (18209 MB)
SCSI device sdd: drive cache: write through
sdd: sdd1
Attached scsi disk sdd at scsi1, channel 0, id 2, lun 0
(scsi1:A:3): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: COMPAQ Model: BB01811C9C Rev: 3B05
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:3:0: Tagged Queuing enabled. Depth 32
SCSI device sde: 35565080 512-byte hdwr sectors (18209 MB)
SCSI device sde: drive cache: write through
sde: sde1
Attached scsi disk sde at scsi1, channel 0, id 3, lun 0
(scsi1:A:4): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: COMPAQ Model: BB01811C9C Rev: 3B05
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:4:0: Tagged Queuing enabled. Depth 32
SCSI device sdf: 35565080 512-byte hdwr sectors (18209 MB)
SCSI device sdf: drive cache: write through
sdf: sdf1
Attached scsi disk sdf at scsi1, channel 0, id 4, lun 0
(scsi1:A:5): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: COMPAQ Model: BB01811C9C Rev: 3B05
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:5:0: Tagged Queuing enabled. Depth 32
SCSI device sdg: 35565080 512-byte hdwr sectors (18209 MB)
SCSI device sdg: drive cache: write through
sdg: sdg1
Attached scsi disk sdg at scsi1, channel 0, id 5, lun 0
(scsi1:A:6): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: Quantum Model: XP39100J Rev: LYJ0
Type: Direct-Access ANSI SCSI revision: 02
scsi1:A:6:0: Tagged Queuing enabled. Depth 32
SCSI device sdh: 17773524 512-byte hdwr sectors (9100 MB)
SCSI device sdh: drive cache: write through
sdh: sdh1
Attached scsi disk sdh at scsi1, channel 0, id 6, lun 0
scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 3940 SCSI adapter>
aic7870: Wide Channel B, SCSI Id=7, 16/253 SCBs
hda: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
hdc: ATAPI 24X DVD-ROM drive, 512kB Cache
sr0: scsi-1 drive
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 8, lun 0
st: Version 20040403, fixed bufsize 32768, s/g segs 256
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi0, channel 0, id 8, lun 0, type 5
Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0, type 0
Attached scsi generic sg3 at scsi1, channel 0, id 1, lun 0, type 0
Attached scsi generic sg4 at scsi1, channel 0, id 2, lun 0, type 0
Attached scsi generic sg5 at scsi1, channel 0, id 3, lun 0, type 0
Attached scsi generic sg6 at scsi1, channel 0, id 4, lun 0, type 0
Attached scsi generic sg7 at scsi1, channel 0, id 5, lun 0, type 0
Attached scsi generic sg8 at scsi1, channel 0, id 6, lun 0, type 0
etc.
So I was wondering how to mount the USB device ?
Thanks,
Dee
---------
To unsubscribe, send email to <aklug-request@aklug.org>
with 'unsubscribe' in the message body.
Received on Sat Dec 25 16:15:13 2004
This archive was generated by hypermail 2.1.8 : Sat Dec 25 2004 - 16:15:13 AKST