Subject: Re: Friday night gathering
From: Jim Gribbin (jewelrysupplier@gci.net)
Date: Sat Apr 12 2003 - 15:00:22 AKDT
If you suspect a heat issue, a lot of bios' have a temperature
monitoring page. It sounds like whatever is happening is happening
fairly quickly. You could watch the monitoring page and see if something
is rising too quickly, or a fan not running up to speed.
It could also be the power supply going out or voltage regulation on the
motherboard.
Jim Gribbin
On Fri, 2003-04-11 at 16:32, Tim Jordan, Network Services wrote:
> I have a problem that is going to keep me from my first Linux Friday
> night gathering....:(
>
> I have a W98 machine that is constantly hanging. I suspect a heat
> issue. The PC stalls out after about 2 min. into the windows
> installation. It also hangs when I'm in the BIOS. Only cutting the
> power will get me a reboot.
>
> I've checked the harddrive, memory, video card, sound card....the only
> thing I have not done is reseat the CPU and heat sink.
>
> What a bummer,
> Tim
>
> deem@wdm.com wrote:
>
> >Try again reaching the website. I tried and it came up. As far as the group, there is
> >usually enough talent to accomplist that so I wouldn't hesitate to attend.
> >
> >Location:IDEA Building, 200 Center Ct. Turn East on Potter from C St, South
> >on B St, about 1 block down on the left you will find Center Ct. IDEA is straight
> >back, we are around back of the building.
> >
> >Usually starts around 6:00pm.
> >
> >Have fun,
> >
> >Dee
> >
> >On 11 Apr 2003 at 9:22, Tim Jordan, DOL&WD Network Se wrote:
> >
> >
> >
> >> Objective: join linux clients to Windows domain using either
> >>winbind/pam_smb as authentication.
> >>
> >>Will anyone be intrested in working on this project this evening? If so
> >>I was going to start installing linux on my spare boxes for a test bed.
> >>
> >>Also, could someone send me directions and what time we should start. I
> >>can't reach the AKLUG website.
> >>Tim
> >>
> >>-------- Original Message --------
> >>Subject: Re: Samba,winbind,pam_smb
> >>Date: 10 Apr 2003 01:19:14 -0800
> >>From: Jim Gribbin <jgribbin@alaska.net>
> >>To: Tim Jordan <timothy_jordan@labor.state.ak.us>
> >>CC: AKLUG <aklug@aklug.org>
> >>References: <3E94BB89.5020808@labor.state.ak.us>
> >>
> >>
> >>
> >>I've never used any of those directly, but I'm willing to help look up
> >>documentation, kibitz, or whatever.
> >>
> >>Jim Gribbin
> >>
> >>On Wed, 2003-04-09 at 16:32, Tim Jordan wrote:
> >>
> >>
> >>>I'm very interested in working on getting either winbind or pam_smb
> >>>authentication working properly in my W2K domain. I have had mixed
> >>>sucess over the past week with windbind. I have had no luck w/getting
> >>>pam_smb working properly.
> >>>
> >>>If I brought a few computers & linksys router would anyone be interested
> >>>in tackling this project Friday night?
> >>>
> >>>I was thinking of bringing:
> >>>1. W2K PDC
> >>>2. clean install of Mandrake 9.1
> >>>3. clean install of RedHat 9
> >>>4.Linksys router
> >>>
> >>>Tim
> >>>
> >>>
> >>>---------
> >>>To unsubscribe, send email to
> >>>with 'unsubscribe' in the message body.
> >>>
> >>>
> >>>
> >>
> >>
> >>---------
> >>To unsubscribe, send email to <aklug-request@aklug.org>
> >>with 'unsubscribe' in the message body.
> >>
> >>
> >>
> >>
> >
> >
> >
> >---------
> >To unsubscribe, send email to <aklug-request@aklug.org>
> >with 'unsubscribe' in the message body.
> >
> >
> >
>
>
> ---------
> To unsubscribe, send email to <aklug-request@aklug.org>
> with 'unsubscribe' in the message body.
>
---------
To unsubscribe, send email to <aklug-request@aklug.org>
with 'unsubscribe' in the message body.
This archive was generated by hypermail 2a23 : Sat Apr 12 2003 - 14:53:50 AKDT