Subject: Re: Linux and CISCO AIR-PCI350 Series cards ?
From: Jim Gribbin (jewelrysupplier@gci.net)
Date: Tue Sep 10 2002 - 17:02:49 AKDT
I suppose you've already checked the Cisco Aironet Linux Client FAQ?
http://www.cisco.com/warp/public/102/wlan/linux-clients-faq.html
On Tue, 2002-09-10 at 16:14, W.D.McKinney wrote:
>
> On (10/09/02 15:30), R. Andom wrote:
> >
> > I have had the PCMCIA versions of the cards (340 and 350 series) working
> > the past under linux. Once WEP was enabled in all cases I had to start the
> > ACU for everything to start working properly each time I rebooted but
> > other than that it has worked well (they might have corrected that in the
> > newer drivers/firmware - the latest versions of the drivers I have used
> > under Linux have been at least 5 months old).
> >
> > Another note - when loading the drivers for the 340 or 350 series you have
> > to use the proper drivers for that series. Although it will load the
> > drivers for the other series and claim that the card has been detected
> > properly you won't be able to talk on the wireless network.
> >
> > -Alan
>
>
> Hi Alan,
>
> I am writing this on my laptop with a 340 PCMCIA in it the question
> posted was on the AIRONET PCI card, not the PCMCIA cards.
>
> The AIR-PCI350 as in http://www.seattlewireless.net/index.cgi/CiscoAironet
> and look at the PCI card pic.
>
> Best Regards,
> Dee
>
>
> --
> W.D.McKinney (Dee)
> http://3519098920
>
>
> ---------
> To unsubscribe, send email to <aklug-request@aklug.org>
> with 'unsubscribe' in the message body.
>
-- Jim Gribbin ----------------------------------- Anchorage Jewelry Supply 700 W Fireweed Lane Anchorage, AK 99503Phone (907) 277-7338 Fax (907) 277-7339
--------- To unsubscribe, send email to <aklug-request@aklug.org> with 'unsubscribe' in the message body.
This archive was generated by hypermail 2a23 : Tue Sep 10 2002 - 17:03:23 AKDT