Here's what I've got so far
1. UDMA 2 - doesn't do more then that
2. Network speeds reach 12MB/sec. I downloaded a file over HTTP
3. USB 2 and Firewire combo card is installed
4. Transfering files with SSH is very slow. Uses all the CPU
5. Rsync with out SSH runs around 4MB/sec
The package for the combo card says USB 2 but here's what I get with lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX
Host bridge (rev 02)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX
AGP bridge (rev 02)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE
(rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB
(rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:0d.0 Ethernet controller: Linksys NC100 Network Everywhere Fast
Ethernet 10/100 (rev 11)
00:0f.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:0f.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:0f.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:0f.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
00:0f.4 FireWire (IEEE 1394): ALi Corporation M5253 P1394 OHCI 1.1
Controller
00:11.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX
[Cyclone] (rev 24)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro
AGP 1X/2X (rev 5c)
Only one of the ports shows up as USB 2. The rest are all USB 1.1. I
think I got riped off. My USB drive works but I can't tell if it's USB 2
or 1.1.
---------
To unsubscribe, send email to <aklug-request@aklug.org>
with 'unsubscribe' in the message body.
Received on Fri Jul 8 11:55:10 2005
This archive was generated by hypermail 2.1.8 : Fri Jul 08 2005 - 11:55:10 AKDT