Re: Configuring a Linksys AP

And if that doesn't work, there's always a port scanner. I also think
I have a serial interface cable for one of those lying around
somewhere.

On 4/12/05, Andy Hall <andyhall@gci.net> wrote:
>=20
>=20
> Ooops.
>=20
> The base address of the wap54g is 192.168.1.245
>=20
>=20
> -----Original Message-----
> From: aklug-bounce@aklug.org [mailto:aklug-bounce@aklug.org]On Behalf Of
> Andy Hall
> Sent: Tuesday, April 12, 2005 2:33 AM
> To: 'damien hull'; 'aklug'
> Subject: RE: Configuring a Linksys AP
>=20
> The base address of the wap54g is 192.168.245
>=20
> -----Original Message-----
> From: aklug-bounce@aklug.org [mailto:aklug-bounce@aklug.org]On Behalf Of
> damien hull
> Sent: Monday, April 11, 2005 1:03 PM
> To: aklug
> Subject: Configuring a Linksys AP
>=20
> I'm trying to configure the wap54g Linksys AP. I can connect wireless so
> I know that part is working. I would like to add wep and other forms of
> security but I can't access the web interface.
>=20
> I've searched google but all I got from that was "access the web
> interface". They don't tell you how to do it.
>=20
> I've changed my workstation address to 192.168.1.2 and tried to access
> 192.168.1.1 but no luck.
>=20
> I would "RTFM" but I don't have the manual.
>=20
> ---------
> To unsubscribe, send email to <aklug-request@aklug.org>
> with 'unsubscribe' in the message body.
>=20
> ---------
> To unsubscribe, send email to <aklug-request@aklug.org>
> with 'unsubscribe' in the message body.
>=20
> ---------
> To unsubscribe, send email to <aklug-request@aklug.org>
> with 'unsubscribe' in the message body.
>=20
>
---------
To unsubscribe, send email to <aklug-request@aklug.org>
with 'unsubscribe' in the message body.
Received on Wed Apr 13 13:23:46 2005