Subject: Hardware going, clearing up after move.
From: Christopher E. Brown (cbrown@woods.net)
Date: Fri Feb 28 2003 - 04:02:04 AKST
Hey all, have a moderate amount of hardware here I found after YAM
(Yet Another Move) I don't really have much use for.
SoundCards
Ensonic ES1371 (PCI)
Creative Labs ES1371 (PCI) Same as above, but made after buyout
Creative Labs SoundBlaster CT4170 (ISA) AKA Vibra 16 PnP
Creative Labs SoundBlaster CT4170 (ISA) AKA Vibra 16 PnP
Creative Labs SoundBlaster CT4170 (ISA) AKA Vibra 16 PnP
Aureal Vortex AU8810A1 (PCI)
Video Cards
ELSA TNT2 Vanta 16G (AGP) NVIDIA Riva TNT2 64 chipset
Trident TGUI9680 (PCI
Appian Jeronimo J2/N Dual head (PCI) Cirrus CL-GD5462 chipset
Network Cards
3Com EtherLink III 3c509B-Combo (ISA) 10Mbit
Kingston KNE20BT Combo (ISA) NE2000 PnP, 10Mbit
Misc Cards
SIIG Floppy + Dual IDE interface (ISA) (refit card for PIO/DMA
mode and 2G+ drives on older systems)
Mainboards
SuperMicro P5MMS98 w/ K6-200 (AT)
Nice little AT board, takes EDO or PC66 SDRAM and up to a
K6-350 (IIRC)
2 x 7ft tall 4 post 19" racks and spare parts, with many fittings,
several smoked glass doors, etc.
Also, Mitsubishi Bigscreen rear projection TV high 40 something
inches, needs some fixing. It has no controls (remote control only),
no internal speakers, and a flaw in the display tuner. The projection
system/etc is fine, but there is a small adjustment board that syncs
the 3 projections (red/Green/Blue), it is damaged. One can pipe video
into id, but there is a 1/4 inch or so offset between the placement of
the 3 colors. I had planned to use it as a display only (I already
have a proper sound system), and feed it SVIDEO from the DVD and RCA
composite from the external tuner, but never got around to repairing
or replacing (IIRC around 250$) the color sync board.
The TV is free to whoever can haul it away first, it will take at
least a mini-truck or van to move it (no, not *my* truck, yours).
The rest of the hardware is going cheap, contact me off-list if
interested. (And yes, with the possable exceptions of the Aureal
Vortex and the Appian card (never tried them) they all work under
Linux.)
-- I route, therefore you are.--------- To unsubscribe, send email to <aklug-request@aklug.org> with 'unsubscribe' in the message body.
This archive was generated by hypermail 2a23 : Fri Feb 28 2003 - 04:01:53 AKST