I need help with usb-storage (Long)


Subject: I need help with usb-storage (Long)
From: Mike Mellor (mmellor1@yahoo.com)
Date: Fri May 17 2002 - 14:35:07 AKDT


Hello -

I recently did a clean install of RH7.2 (after I was unsuccessful in getting Skipjack to start an X session). Before I started messing up my configuration I was able to mount my camera with "/dev/sdb1 -t vfat /mnt/pix".

Now, I am unable to mount the camera. I have also tried using a compact flash reader (which I think had even more trouble). When I try to mount, the command line hangs - ctrl-c doesn't work, and I end up just killing the term. The mount processes remain in top with a D stat, and I am unable to kill them.

Here are some snippets from dmesg that may help:

The first is right after I plugged the CF reader in:

uhci.c: uhci_result_control() failed with status 440000
[c2b940f0] link (02b94062) element (02b951e0)
  0: [c2b951e0] link (02b95210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=00e93de0)
  1: [c2b95210] link (02b95240) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=01f55000)
  2: [c2b95240] link (02b95270) e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=2, PID=69(IN) (buf=01f55008)
  3: [c2b95270] link (02b952a0) e3 SPD Active Length=0 MaxLen=1 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=01f55010)
  4: [c2b952a0] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000)

usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -110

Next is after I unplugged the CF reader and plugged in the camera:

usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command READ_CAPACITY (10 bytes)
usb-storage: 25 00 00 00 00 00 00 00 00 00 1d c0
usb-storage: Bulk command S 0x43425355 T 0x25 Trg 0 LUN 0 L 8 F 128 CL 10
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 8 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 8/8
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x25 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
SCSI device sdb: 125441 512-byte hdwr sectors (64 MB)
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command MODE_SENSE (6 bytes)
usb-storage: 1a 00 3f 00 ff 00 00 00 00 00 1d c0
usb-storage: Bulk command S 0x43425355 T 0x26 Trg 0 LUN 0 L 255 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 12/255
usb-storage: Bulk data transfer result 0x1
usb-storage: Attempting to get CSW...

Finally, here's what I get when I try to mount the camera:

usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command MODE_SENSE (6 bytes)
usb-storage: 1a 00 3f 00 ff 00 00 00 00 00 1d c0
usb-storage: Bulk command S 0x43425355 T 0x26 Trg 0 LUN 0 L 255 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 12/255
usb-storage: Bulk data transfer result 0x1
usb-storage: Attempting to get CSW...
usb-storage: command_abort() called
usb-storage: Bulk status result = -104
usb-storage: Bulk reset requested
usb-storage: Bulk soft reset failed -32
usb-storage: -- transport indicates transport failure
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.

Also here's what I've got going for modules:

ppp_deflate 42016 0 (autoclean)
ppp_async 6576 1 (autoclean)
ppp_generic 17888 3 (autoclean) [ppp_deflate ppp_async]
slhc 4736 1 (autoclean) [ppp_generic]
ipt_state 576 2 (autoclean)
iptable_filter 1680 1 (autoclean)
ip_conntrack_ftp 3792 0 (unused)
ip_conntrack 21648 2 [ipt_state ip_conntrack_ftp]
ip_tables 13920 2 [ipt_state iptable_filter]
usb-storage 43344 0
ppa 9856 0 (unused)
parport_pc 12784 2 (autoclean)
lp 6272 0 (autoclean)
parport 14912 2 (autoclean) [ppa parport_pc lp]
floppy 47920 0 (autoclean)
sb 7536 0 (unused)
sb_lib 34176 0 [sb]
uart401 6128 0 [sb_lib]
sound 55504 0 [sb_lib uart401]
uhci 26144 0 (unused)
usbcore 56128 1 [usb-storage uhci]
rtc 6528 0 (autoclean)

Please help - my camera is filling up!

Thanks.

Mike

-- Attached file included as plaintext by Listar --

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)

iD8DBQE85YWh6438uuwmv8IRAlvsAJ0eDukY/LkcYC33Enmy7YQq+J+zhwCcCAhY
AxX4lDZUS5/2Dn5n0Nqe74s=
=9Hje
-----END PGP SIGNATURE-----

---------
To unsubscribe, send email to <aklug-request@aklug.org>
with 'unsubscribe' in the message body.



This archive was generated by hypermail 2a23 : Fri May 17 2002 - 14:32:26 AKDT