ide-scsi

Subject: ide-scsi
From: Greg Madden (pabi@gci.net)
Date: Thu Mar 14 2002 - 15:56:30 AKST

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Next message: Clay Scott: "Re: AKLUG, APULUG and the organization (sorta long)"
• Previous message: Richard Mckinney: "MS Office tracking users"

On my Woody box I setup /dev/hdc (cdrom) as ide-scsi, using the 2.2.20
kerenl. This box has an onboard adaptec scsi controller/ scsi cd burner.

From /etc/modutils/actions
options ide-cd ignore='hdc'
pre-install modprobe sg ide-scsi

alias scsi_hostadapter1 aic7xxx
alias scsi_hostadapter2 ide-scsi

I changed to the 2.4.18 kernel and now I get an error from xcdroast that
my scsi bus(s) have changed. I think running the 2.4.18 kernel has
changed the order of my two scsi bus's, if that is possible.

scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
        <Adaptec aic7890/91 Ultra2 SCSI adapter>
        aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs

If the order of has changed can I just reverse the order in
/etc/modutils/actions?

-- 
Greg Madden
Precision Air Balance, Inc.
email:pabi@gci.net
Phone:(907)276-0461 Fax:(907)258-0461

• Next message: Clay Scott: "Re: AKLUG, APULUG and the organization (sorta long)"
• Previous message: Richard Mckinney: "MS Office tracking users"

This archive was generated by hypermail 2a23 : Thu Mar 14 2002 - 15:58:31 AKST